Kenwood DNX9190DABS Instruction Manual page 72

For AV-IN input terminal:
1
Touch [AV-IN].
h Displays the picture from view camera h
connected to AV-IN input terminal.
2
Select the view camera to set up.
1
1
Picture from view camera
Displays the picture from view camera
connected to AV-IN input terminal. (P.102)
2
[Front]
3
[Dashboard Camera]
(Except DNR3190BTS)
4
[Right]
5
[Left]
6
[None]
3
Touch [Enter].
NOTE
• The Dashboard Camera can be selected when it is
connected. (P.102)
2 3 4 5 6
Autogoods "130"
Other External Components
Ñ
To adjust the parking
guidelines
NOTE
• Install the rear view camera in the appropriate
position according to the instruction manual
supplied with the rear view camera.
• When adjusting the parking guidelines, make
sure to apply the parking brake to prevent the car
from moving.
1
Touch [Parking Guidelines] in the Camera
screen and set to [ON]. (P.69)
2
Touch [Guidelines SETUP] on the Camera
screen.
3
Adjust the parking guidelines by
selecting the mark.
4
Adjusting the position of the selected
mark.
C
Make sure that lines A and B are
horizontally parallel, and that lines C and
D are of the same length.
NOTE
• Touch [Initialise] and then touch [Yes] to set all
the marks to their initial default position.
A
D
B
English
71