Related Manuals for Prestige Quick & Easy
Summary of Contents for Prestige Quick & Easy
- Page 1 Quick & Easy For performance and safety, remember to replace your gasket and secondary safety device every 12 months Call our helpline on 0151 482 8282 or email us at customersupport@meyeruk.com...
- Page 2 For more information These foods should be brought to the boil in the uncovered on your product go to www.prestige.co.uk pressure cooker and then skimmed before the lid is closed. Product item code can be found on the base of your pressure cooker.
- Page 3 (It is normal for some steam to continue to escape from this device). secondary safety device come If you need help please contact us at www.prestige.co.uk Open/Close switch 8. Once the secondary safety device come visual pressure indicator has dropped fully down turn the open / close switch to the open position, see section on page 9 ‘how to open your aluminium...
- Page 4 19-25 31-37...
- Page 6 17-19 30-35...
- Page 7 The body and lid of your Prestige pressure cooker is guaranteed for a period of 10 years from date of purchase to be free from defects in materials and workmanship under normal household use. All removable parts such as the handles, gasket, pressure regulator valves, safety valves, baskets, trivet etc.
- Page 8 Pressure Regulator 10PSI SS Hold Down Cup Vent Tube Quick Steam Release SS Hold Down Cup Open Close Switch Lid Handle Screw Open Close Switch Lid Handle Lid Handle Secondary Safety Device/Visual Pressure Indicator (Grey Colour) Square Nut for Lid Handle Zero Pressure Device Grommet for Zero Pressure Device Vent Tube Nut...
- Page 9 Do not force the handle. This may indicate there is still pressure inside Lift off the lid. 2. Once secondary safety device come visual pressure indicator Take care to avoid has dropped, turn the open and contact with steam close switch to the open position. or food Note : 1) Do not force the switch to the open position.
- Page 11 In the unlikely event of the regulator allowing pressure to reach To prevent the cooker from opening with pressure inside you must; higher than normal, the secondary safety device come visual check that the secondary safety device come visual pressure indicator pressure indicator will operate by opening up in the center is fully down, do not apply force to move the open / close switch to the open position and do not force the lid handle to open it.
- Page 12 Never place in the dishwasher Secondary safety device - This can be washed while still in the lid. Check each time before use to ensure there are no additional splits, tears or cracks on the flanges. There should be a X cut only in the centre of the device.
- Page 13 Secondary safety device come...
- Page 14 Secondary safety device come Grey come visual pressure indicator has...
- Page 15 How to replace the Zero Pressure Device (spare part No.60560) 1. Remove the ZPD from your cooker by pulling it from the inside of the lid. 2. Fix the grommet. 3. Firmly insert the new ZPD from underside of the lid. 4.
- Page 16 The following spares are available for purchase on www.prestige.co.uk Pressure regulator 10PSI 60557 60558 ZPD Assembly for Alu Q&E with Grommet 60560 60559 SS Hold down dup 90212C Lid handle with screws Body Handle with Screws Helper Handle with Screw...
- Page 19 Version 4 10PSI November 2014...