2019/01/18 06:14:17 (GMT+09:00)
Notes on Assembling the SS Base
After installing SS Base, make sure there are no gap.
NG
Gap
OK
No gap
4-2-24.
Cabinet (G)
[ 1 ]
FDR-AX700
[ 7 ] Jack cover
[ 9 ] Cabinet (G)
[ 5 ] MIC lid
[ 6 ] USB lid
Notes on Assembling the Muffle Sheet
Attach the Muffle Sheet as shown in figure.
[ 8 ] WF cushion
Refer to "Notes on Assembling the WF Cushion".
[ 4 ] USB lid shaft
[ 3 ] USB lid retainer
Sony CONFIDENTIAL
For Authorized Servicer
Muffle sheet
Muffle sheet
[ 2 ] two screws
#12 (M1.7 X 5.0)
(0.12 ± 0.02 N·m)
4-34
SYS SET