American Megatrends Super Voyager LC User Manual page 34

Step 7 Connect Cables,
J16 Turbo LED
J16 is a 2-pin berg that connects to the Turbo LED via a cable. The
LED lights when the board is running at high speed. Connect the
Turbo LED to J16 as shown below.
J21 Turbo Switch
J21 is a two-pin berg that connects to the Turbo switch mounted on
the chassis via a cable, as shown below. The Turbo LED switch is
bipolar. You can select Low or High speed by pressing the Turbo
switch.
Chapter 2 - Installation
28
Continued