Step
Description
6
If you are upgrading the StorTrends® 1100 Storage. Appliance. type the following command
followed by the <ENTER> key:
mount /dev/hdc /mnt/source
AMI XXX (StorTrends)
Kernel X.X.X-X.XXXXXX on an XXXX
XXXXXXXXXXXXXXX login: root
Password:
[root@ITXXXXXXXXXXXXX ~]# mkdir /mnt/source
[root@ITXXXXXXXXXXXXX ~]# mount /dev/hdc /mnt/source
mount: block device /dev/hdc is write-protected, mounting read-only
[root@ITXXXXXXXXXXXXX ~]# _
If you are upgrading the StorTrends® 3100 Storage. Appliance., type the following command
followed by the <ENTER> key:
mount /dev/scd0 /mnt/source
AMI XXX (StorTrends)
Kernel X.X.X-X.XXXXXX on an XXXX
XXXXXXXXXXXXXXX login: root
Password:
[root@ITXXXXXXXXXXXXX ~]# mkdir /mnt/source
[root@ITXXXXXXXXXXXXX ~]# mount /dev/scd0 /mnt/source
mount: block device /dev/scd0 is write-protected, mounting read-only
[root@ITXXXXXXXXXXXXX ~]# _
Appendix D : Upgrade Procedure 123