Step
Description
2
After a few seconds, you may be prompted with the option to stop the installation if you
already have the StorTrends iTX Software already loaded on your Storage Appliance.
are not prompted by this option, skip this step.
Note:
StorTrends iTX
Press the <ENTER> key to continue with the reinstallation.
3
You will be prompted to confirm that you want to continue with the installation of the
StorTrends Software.
StorTrends iTX
Press the <ENTER> key to continue with the reinstallation.
Use the <TAB> key to move between fields. Use the <SPACE BAR> key to place a
check in an option bracket. Use the <ARROW> keys to move up and down and left
and right.
Disk Cleanup
This unit already has AMI iTX software. Do you want to
re-install?
IT WILL ERASE ALL THE EXISTING DATA.
If you want to Upgrade, please follow the upgrade
procedure.
Do you want to continue to re-install?
< Yes >
< No >
If you are not prompted by this option, skip this step.
AMI Installation
Do you want to continue the installation?
< Yes >
< No >
If you
Appendix C : Reinstallation Procedure 113