Lcd Display Screens - American Megatrends StorTrends 1108-J User Manual

LCD Display Screens

Screen
American
Megatrends
Main Menu
System Control
IP Setup
System Control
Reboot
Shutdown
Reboot Server?
OK = Yes, ESC = No
Shutdown Server?
OK = Yes, ESC = No
Server Info
"Server Name"
IP0:000.000.000.000
IP1:000.000.000.000
Resource Usage
CPU :
Memory :
Volume Status
Volume 0
Optimal
Disk Status
Disk 0
Online
Good
Last Event
None
NIC Selection
NIC 0
NIC 1
NIC 0 IP Setup
DHCP
Static IP
Static IP Config
IP 000.000.000.000
Mask 000.000.000.000
Gate 000.000.000.000
Accept Change?
YES
NO
Accept Change?
YES
NO
Accept Change?
YES
NO
IP Setup Changed
Changes will be
in effect only
after reboot
AMI Logo Screen. This screen appears when the StorTrends 1108-N is powered on and
has fully booted.
NAS
Main Menu. This screen appears when you press the "OK/Menu" button at the AMI
Logo Screen.
System Control. This screen appears when you select System Control from the Main
Menu using the navigation arrows. Use the arrow keys to select an option then press the
"OK/Menu" button.
Reboot. This screen appears when the Reboot option is highlighted in the previous
screen and the user presses the "OK/Menu" button.
Shutdown. This screen appears when you select the Shutdown option in the System
Control screen and press the "OK/Menu" button.
Server Info. This screen appears when you press the right navigation arrow from the
AMI Logo Screen.
Resource Usage. This screen appears when you press the right navigation arrow from
the Server Info Screen.
xx %
xx %
Volume Status. This screen appears when you press the right navigation arrow from the
Resource Usage Screen. Volume can have a value between 0 through 4. The Volume
status can be Optimal, Failed, Degraded, Initializing, or Rebuilding.
Disk Status. This screen appears when you press the right navigation arrow from the
Volume Status Screen. The Disk status can be Empty, Failed, Good, Initializing, or
Rebuilding.
Last Event. This screen appears when you press the right navigation arrow from the
Disk Status Screen. Press the "ESC" button to return to the AMI Logo Screen.
NIC Selection. This screen appears when you select toggle down to IP Setup from the
Main Menu Screen and press the "OK/Menu" button.
IP Setup. This screen appears when you select NIC 0 from the NIC Selection Screen and
press the "OK/Menu" button.
Static IP. This screen appears when you toggle down and select Static IP from the NIC
0 IP Setup Screen and press the "OK/Menu" button. Use the Right and Left navigation
buttons to select a value and the Up and Down navigation buttons to toggle between
possible values.
Enter Static Values. This screen appears when you press the "OK/Menu" button after
entering the values in the Static IP Config Screen.
DHCP. This screen appears when you select DHCP from the NIC 0 /NIC 1 IP Setup
Screen and press "OK/Menu" button.
Confirm. This screen appears when you select DHCP from the NIC 0 /NIC 1 IP Setup
Screen and press "OK/Menu" button or when you press "OK/Menu" after configuring
the values in the Static IP Config Screen. You can toggle between the YES and No
values. Once you have selected a value, press the "OK/Menu" to confirm your selection.
This screen appears when you select YES from the Accept Change? Screen and press
the "OK/Menu" button.
Description
Front Panel 13