Scan Limits; Program Preset - American Dynamics SpeedDome Ultra VII Quick Reference Manual

Delete All Zones
16
YOU ARE ABOUT TO DELETE
ALL PRIVACY ZONES.
This option permanently removes all programmed
Privacy Zones. To temporarily hide the zones, use Hide
All Zones. See Privacy Zones (Screen 13).
Select Preset to Program
SELECT PRESET TO PROGRAM
17
PRESET
NUMBER
1-96
FOCUS FAR to program preset
The number of presets available depends on your
operating environment.
• If installed under SensorNet or RS-422, up to 96
presets are available.
• If installed under Manchester, up to 64 presets are
available.

Program Preset

18
Position camera with PAN
TILT, ZOOM and IRIS
FOCUS FAR to save and exit
This screen also appears if a Preset is selected for the
Home Position (Screen 10), and the selected preset
has not been programmed.
SPEEDDOME ULTRA VII 22X DOME CONFIGURATION UTILITY QUICK REFERENCE GUIDE (8200-0184-03, REV. C)
CANCEL
CONTINUE
PRESET NAME
PRESET 1-96
EXIT
PRESETS
PRESET X
EXIT

Scan Limits

19
Cancel RIGHT limit to Delete
Cancel RIGHT limit to Delete
Scan Limits are used to set right and left areas of
surveillance with compatible controllers. These scans
may be activated using the Quick Set Menu
(Screen 28).
• Use Pan/Tilt to adjust the dome's pointing direction.
• Press Zoom to select the left and right scan limits.
Press Focus to cancel changes.
•
• Press Focus when setting right scan limit to delete
the scan limits.
Name Configuration Menu
20
FOCUS FAR to program names
• Use Zoom to change the display setting.
Press Focus to start name programming for
•
highlighted setting.
• If Camera is selected, the Name Programming
(Screen 22) automatically appears. For others,
Select Name to Program (Screen 21) appears.
5 of 7
SCAN LIMITS
PAN to LEFT limit
ZOOM to mark BOUNDARY
CANCEL
SCAN LIMITS
PAN right to RIGHT limit
ZOOM to mark BOUNDARY
CANCEL
NAME CONFIGURATION MENU
CAMERA NAME ON/OFF
AREA NAME ON/OFF
PRESET NAME ON/OFF
PATTERN NAME ON/OFF
ALARM NAME OFF/ON
RESET PROGRAMMABLE NAMES
EXIT