Connecting The Appliance - Siemens iQ500 User Manual And Installation Instructions

Connecting the appliance

Connect your appliance to the power
supply, water inlet and water outlet.
Connecting the water inlet hose
Note
¡ Please read the information in the
"Safety" → Page 4 and "Preventing
material damage" → Page 11 sec-
tions to ensure that you use the
appliance safely.
Connect the water inlet hose.
1.
1
Connect the water inlet hose to a
2.
tap (26.4 mm = 3/4").
Open the water tap carefully and
3.
check that the connection points
are tight.
Water outlet connection types
This information is intended to help
you to connect this appliance to the
water outlet.
2
¾˝
min.
10 mm
min.
17 mm
Installation and connection en
Note: Please read the information in
the "Safety" → Page 4 and "Prevent-
ing material damage" → Page 11 sec-
tions to ensure that you use the appli-
ance safely.
ATTENTION!
When draining, the water outlet hose
is subject to water pressure and may
come loose from the installed con-
nection point.
Secure the water outlet hose
▶
against unintentional loosening.
Note: Observe the draining heights.
The maximum draining height is
100 cm.
Drainage into a si-
phon
Drainage into a wash-
basin
Drainage into a plastic
pipe with rubber
sleeve or into a gully.
Secure the connec-
tion point with a (24–
40 mm) hose clamp.
Fix and secure the wa-
ter outlet using an "el-
bow." → Page 30
Fix and secure the wa-
ter outlet using an "el-
bow." → Page 30
17