1020 series 30/60-watt led infrared illuminator (11 pages)
Summary of Contents for American Dynamics 1010T Series
Page 1
Incandescent Illuminator Installation and Operating Instructions This manual describes the installation and operating procedures for the American Dynamics 1010/T Series Illuminator. Before installation is started, become familiar with all the special features and warnings associated with this equipment. Once installation is complete, store this manual in a safe, convenient location for future reference.
Information furnished by AMERICAN DYNAMICS is believed to be accurate and reliable. However, no responsibility is assumed by AMERICAN DYNAMICS for its use; nor for any infringements of other rights of third parties which may result from its use. No license is granted by implications or otherwise under any patent or patent rights of AMERICAN DYNAMICS.
DESCRIPTION The 1010T Series Infrared Illuminator provides outstanding results when used with IR sensitive black/white cameras. The light produced by the 1010T Series is invisible to the human eye. This feature is excellent for covert security or where the addition of visible lighting is not possible. The 300 watt spot-lamp is designed to project a highly concentrated IR beam to a distance of 460 feet (140 m), covering an area 100 ft wide x 66 ft high.
Maximum Range 460 (feet) Lens Size IR Illuminated Area -vs- Distance The beam transmitted by the 1010/T provides effective IR illumination to 460 feet (140 meters). Table 3 lists the spotlight area covered by the beam. 0.83"/21 mm Table 2 - Minimum Focal Length Lens Size Camera Format 1"...
BULB REPLACEMENT Before servicing the Illuminator, power down the unit and allow approximately one hour to cool. Replacement bulbs can be ordered through American Dynamics (part # AD1010/TBB). IR bulb replacement is done without removing the Illuminator from its mount.
TROUBLESHOOTING Do not look directly into an operational Illuminator! Since IR light is invisible to the human eye, the only method of verifying a malfunctioning IR lamp is at the video output location. Before starting any maintenance work on the 1010T, be certain that the video system (i.e. cameras, monitors, etc.) is functioning properly.
Dusk-to-dawn switch (will operate 3 units) AD1050/PL: "L" Bracket - one IR Illuminator on Patriot Series Pan/Tilt AD1050/PT: "T" Bracket - two IR Illuminators on Patriot Series Pan/Tilt AD1050/HL: "L" Bracket - one IR Illuminator on Hercules Series Pan/Tilt AD1050/HP: "T"...