(1)-1
BATTERY (-) CONTACT
NOTE1 (Assembling)
(1)-2 Soldering
(1)-2
BATTERY (-) LEAD
(Black)
(2)-3
BATTERY CONTACT (+) GUARD
Fig. 3-15 BATTERY (-) CONTACT, BATTERY (+) CONTACT
2-13 BATTERY (-) CONTACT, BATTERY (+) CONTACT
(1) BATTERY (-) CONTACT
1. Remove the BATTERY (-) CONTACT in the way of pushing it from the rear of the MAIN FRAME.
2. Remove soldering and remove the BATTERY (-) LEAD.
NOTE1 (Assembling)
After soldering, apply the DIA BOND 1663G.
(2) BATTERY (+) CONTACT
1. Remove the BATTERY (+) CONTACT in the way of pushing it from the rear of the MAIN FRAME.
2. Remove soldering and remove the BATTERY (+) LEAD.
NOTE2 (Assembling)
After soldering, apply the DIA BOND 1663G.
3. Remove the BATTERY CONTACT (+) GUARD.
NOTE3 (Assembling)
Route the lead wire as shown in the illustration.
MAIN FRAME
(1)-1
(2)-1
(2)-3
(2)-2 Soldering
NOTE2 (Assembling)
(2)-1
BATTERY (+) CONTACT
NOTE3 (Assembling)
How to route the wire.
BATTERY (-) CONTACT
BATTERY (+) CONTACT
*1
3-15
CHAPTER 3. REPAIR INSTRUCTION
(1)-1
(2)-2
BATTERY (+) LEAD
(Red)
DIA BOND 1663G
Black
DIA BOND 1663G
(2)-1
Red