Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Supermicro AOC-ATG-i2T2SM
Summary of Contents for Supermicro AOC-ATG-i2T2SM
- Page 1 AOC-ATG-i2T2SM User's Guide Revision 1.0...
- Page 2 Santa Clara County in the State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product.
- Page 3 AOC-ATG-i2T2SM add-on card. About this Add-on Card The Supermicro® AOC-ATG-i2T2SM is one of the most flexible and scalable 4-port 10Gb network solutions in the market. Based on Intel® X710-TM4 controller, it is designed to support a mixed network interface – two RJ45 and two SFP+ connec- tors, with performance enhancing features and power management technologies.
- Page 4 Super AOC-ATG-i2T2SM Add-on Card User's Guide Conventions Used in the User's Guide Pay special attention to the following symbols for proper system installation and to prevent damage to the system or injury to yourself: Warning: Important information given to ensure proper system installation or to prevent damage to the components or injury to yourself.
- Page 5 Preface...
- Page 6 Super AOC-ATG-i2T2SM Add-on Card User's Guide Contacting Supermicro Headquarters Address: Super Micro Computer, Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. Tel: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (Technical Support) Website: www.supermicro.com Europe Address: Super Micro Computer B.V.
-
Page 7: Table Of Contents
Preface Table of Contents Preface Chapter 1 Overview Overview ......................1-1 Key Features ....................1-1 Specifications ....................1-2 Chapter 2 Hardware Components Add-On Card Image and Layout ..............2-1 Major Components ..................2-2 LAN Ports and LAN LED Indicators ..............2-4 Jumpers and Connectors ................ -
Page 8: Chapter 1 Overview
Overview Congratulations on purchasing your add-on card from an acknowledged leader in the industry. Supermicro products are designed with the utmost attention to detail to provide you with the highest standards in quality and performance. For product support and updates, please refer to our website at http://www.supermicro.com/... -
Page 9: 1-3 Specifications
Super AOC-ATG-i2T2SM Add-on Card User's Guide 1-3 Specifications General • Advanced I/O Module (AIOM) Form Factor • Intel X710-TM4 Ethernet controller ® • Two RJ45 and two SFP+ connectors with speeds up to 10Gbps per port Networking Features • IEEE 802.3ad, 802.1AX Link Aggregation •... - Page 10 Chapter 1: Overview Management Features • Asset Management Features with thermal sensor • NC-SI for remote management • Preboot eXecution Environment (PXE) • iSCSI remote boot Power Savings • ACPI compliant power management • PCI Express Active State Power Management (ASPM) •...
- Page 11 Super AOC-ATG-i2T2SM Add-on Card User's Guide Power Consumption • Maximum power consumption: 10W Operating Conditions • Storage temperature: -40°C to 70°C (-40°F to 158°F) • Storage humidity: 90% non-condensing relative humidity at 35ºC Physical Dimensions • Card PCB dimensions: 76mm x 115mm (W x D) Supported Platforms •...
-
Page 12: Chapter 2 Hardware Components
Chapter 2: Hardware Components Chapter 2 Hardware Components Add-On Card Image and Layout AOC-ATG-i2T2SM Image... -
Page 13: Major Components
Super AOC-ATG-i2T2SM Add-on Card User's Guide LAN2 LAN1 SFP2 SFP1 LAN4 LAN3 AOC-ATG-i2T2S DESIGNED IN USA REV:1.00 AOC-ATG-i2T2SM Layout Major Components 1. Intel® X710-TM4 Ethernet controller 6. Port SFP1 2. LAN1 7. Port SFP2 3. LAN2 8. JDB1 4. LAN3 9. - Page 14 Chapter 2: Hardware Components The following major components are installed on the AOC-ATG-i2T2SM: • Advanced I/O Module (AIOM) Form Factor • Intel® X710-TM4 Ethernet controller • Two RJ45 10Gbps ports • Two SFP+ connector ports • Two jumpers...
-
Page 15: Lan Ports And Lan Led Indicators
Super AOC-ATG-i2T2SM Add-on Card User's Guide LAN Ports and LAN LED Indicators LAN Ports There are four LAN ports on the AOC-ATG-i2T2SM. These LAN ports support con- nection speeds of 10Gbps. Use a direct-attach RJ45 type LAN cable. AOC-ATG-i2T2SM Image Each LAN has one bi-colored LED per port (RJ45 or SFP+) at the bottom of PCB. - Page 16 Chapter 2: Hardware Components SFP+ Ports Two SFP+ 10Gb adapter ports are located on the add-on card. Connect a DAC Twin Axial cable or an LC Fiber-Optic cable to the ports to provide Gigabit Ethernet communication. Refer to the add-on card layout on Page 2-2 for the location of the SFP+ port.
-
Page 17: Jumpers And Connectors
Super AOC-ATG-i2T2SM Add-on Card User's Guide Jumpers and Connectors Explanation of Jumpers To modify the operation of the add-on card, a jumper can be used to choose between optional settings. A jumper creates shorts between two pins to change the function of the connector. -
Page 18: Chapter 3 Installation
Chapter 3: Installation Chapter 3 Installation Static-Sensitive Devices Electrostatic Discharge (ESD) can damage electronic com ponents. To avoid dam- aging your add-on card, it is important to handle it very carefully. The following measures are generally sufficient to protect your equipment from ESD. Precautions •... -
Page 19: Before Installation
Super AOC-ATG-i2T2SM Add-on Card User's Guide Before Installation Before you install the add-on card, follow the instructions below. 1. Power down the system. 2. Unplug the power cord. 3. Use industry-standard anti-static equipment such as gloves or a wrist strap and follow the precautions on page 3-1 to avoid damage caused by ESD. -
Page 20: Installing The Add-On Card Aoc-Atg-I2Tm (With 0.5U Bracket)
Chapter 3: Installation Installing the Add-on Card AOC-ATG-i2TM (with 0.5U bracket) Follow the steps below to install an add-on card into your system. (If the system is fixed onto a rack, the removal of server top cover is not required. If the system is not anchored to a fixed structure, it is recommended to remove the system top cover for ease of installation) A. - Page 21 Super AOC-ATG-i2T2SM Add-on Card User's Guide B. Installing an AIOM module 1. Position the AIOM module in front of the empty slot and gently push onto the metal bracket. The AIOM module should slide into the chassis until the card is securely seated in the connector.
- Page 22 Chapter 3: Installation C. Installing an AIOM module (An AIOM slot with an AIOM slot cover) 1. Remove the AIOM slot cover by unscrewing the knob and screw that attaches the bracket to the chassis. Pull the bracket away and set it aside. 2.
-
Page 23: Installing Drivers On Windows
Follow the steps below to install the drivers for Windows. Download the drivers from the Supermicro FTP site at ftp://ftp.supermicro.com/Networking_Drivers/. 1. Run CDR-NIC. 2. When the SUPERMICRO window appears, click on the computer icon next to the product model. 3. Click on INSTALL DRIVERS AND SOFTWARE. -
Page 24: Installing Drivers On Linux
Chapter 3: Installation Installing Drivers on Linux Follow the steps below to install the drivers for Linux. Download the driver from the Supermicro CDR-NIC LAN driver CD or ftp:// ftp.supermicro.com/Networking_Drivers/CDR-NIC_1.62_for_Add-on_NIC_ Cards/Intel/LAN/PRO40GB/LINUX. Due to the continuous development of the Linux kernel, the drivers are updated more often than the bundled releases. -
Page 25: Installing Drivers On Freebsd
<x.x.x> is the driver version as indicated in the name of the driver tar file. Note: You must have kernel sources installed in order to compile the driver module. Download the driver from the Supermicro CDR-NIC LAN driver CD or ftp:// ftp.supermicro.com/Networking_Drivers/CDR-NIC_1.62_for_Add-on_NIC_ Cards/Intel/LAN/PRO40GB/FreeBSD. - Page 26 Chapter 3: Installation 8. If you want the driver to load automatically when the system is booted: cd ixl-x.x.x/src make make install 9. Edit /boot/loader.conf, and add the following line: ixl_load="YES" compile the driver into the kernel (see item 10) Edit /etc/rc.conf, and create the appropriate ifconfig_ixl<interface_num>...
- Page 27 Super AOC-ATG-i2T2SM Add-on Card User's Guide Notes 3-10...
- Page 28 (Disclaimer Continued) The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency com- munication devices or other critical systems whose failure to perform be reasonably expected to result in significant injury or loss of life or catastrophic property damage.