2.6
Technical data
2.6.1 General data
Total dissipation max.
Conductor cross section of the connection terminals
2.6.2 Power supply for EP010
Supply voltage
Current consumption
2.6.3 Connection of the FieldBusPlug
Mounting
Suitable ABB filed bus plug types
When a Profibus FBP is used, the EP010 GSD file associated to the connected device is
required.
When a deviceNet FBP is used, the relevant EP010 EDS file associated to the connected
device is reqiuired.
They can be downloaded from the ABB web site.
2.6.4 Connection to a Modbus device
Device communication parameters have to be:
ABB SACE
EP010 supports only the "long serial protocol" to communicate with the FBP.
Therefore, the AS-i P and AS-i Fieldbus Plugs cannot be used with the EP010.
Slave Address
Baudrate
Parity
Stop bits
Addressing Type (where applicable)
Table 3. Device communication parameters
EP010
432 mW
max. 2.5 mm
24 V DC via field bus plug
via field bus plug max. 18 mA
Plug connection, fastening with supplied screw
DeviceNET
PROFIBUS DP
247(0xF7)
19200
Even
1
Standard
1SDH000510R0001
2
yes
yes
Page N.
L2388
8/28