Hamilton Beach 70760 Manual page 7

How to Use Slicing/Shredding Disc
Make sure control switch is turned to O
1
Align bowl and base. Turn bowl
clockwise to lock into place.
NOTE: Unit will not work unless
bowl is locked.
5
Cut food to fit food chute. Fill chute
with food.
and unit is unplugged. NOTE: Operate using only one blade or disc at a time.
ff
2
Carefully place disc onto motor
shaft with desired side (Slice or
Shred is stamped on each side
of the blade) facing UP.
6
w WARNING
carefully; it is very sharp.
3
Align lid and bowl.
7
Select O or P on control switch.
n ulse
O : Processor will run continuously.
n
P : For instant on and off control.
ulse
Laceration Hazard. Handle blade
4
Turn lid clockwise to lock into
place. NOTE: Unit will not work
unless lid is locked.
8
Always use food pusher to feed
food into the chute. NEVER PUSH
FOOD THROUGH CHUTE WITH
HANDS.
7