Operation As A Pc Monitor - Grundig AMIRA 17 Manual

24

OPERATION AS A PC MONITOR _______________

Settings for the PC
These settings can only be made using the buttons on the device.
Call up the »PC MENU« with »MENU«.
1
– The »PC MENU« appears, the function/setting which is
currently active is marked in colour.
2 Select the desired function/setting with
activate with »
Options:
BRIGHTNESS – adjust the brightness
CONTRAST – adjust the contrast
POSITION – adjust the horizontal and vertical picture
position
IMAGE
– PHASE – removes horizontal flicker, blurring and
– CLOCK – removes vertical lines
AUTO CONFIG – for automatic adjustment to the PC
INFORMATION – information on resolution and
vertical/horizontal frequency
MISCELLANEOUS – various settings:
– FACTORY RESET – reset to original condition, custom
– OSD TIMEOUT – set the display time of the menu
– OSD POSITION – set the horizontal and vertical
– NATIVE
TV SELECTION – switch to the television channel
GAMMA-MOIRE – for gamma correction (differences
in colour reproduction) and for removing reproduction
errors (interference patterns)
SAVE – save the function or setting.
Note:
If there is a sub-menu, select this with
activate it with »
3 Press »P +« or
Press »MENU« to finish the setting.
4
To save the setting, select the »SAVE« menu item and confirm
5
with »YES«.
Exit the »PC MENU« with »MENU«.
6
+« or » –
horizontal lines
settings are deleted
position of the menu
MODE –
enlargement
+« or »
–
»- P« to carry out the setting.
»P +« or »- P« and
«.
activate/deactivate picture
»P +« or »- P« and
«.