How To Assemble - Hamilton Beach Big Mouth 67702 Instructions Manual

How to Assemble

1. Place Strainer Bowl on top of the
Motor Base. Then place the
Strainer Basket inside the
Strainer Bowl.
5. Place the Pulp Container into
position by tilting the container
slightly.
Strainer Basket
2. With hands on outer edge, press
Strainer Basket down firmly to
latch into position.
6. Place a glass or other container
under the Juice Spout.
Before first use: After unpacking the Juice Extractor, remove cardboard
from Strainer Basket and wash everything except the Motor Base in warm,
soapy water. Rinse and dry immediately. Never immerse the Motor Base in
water or other liquids; wipe it with a damp sponge.
3. Place the Juicer Cover over the
Strainer Bowl, positioning the
Feed Chute over the Strainer
Basket, and lower into position.
Small Ridge
inside Feed
Chute
7. Slide the Food Pusher down
the Feed Chute by aligning the
groove in the Food Pusher with
the small ridge on the inside of
the top of the Feed Chute.
4. Raise the Locking Latches up to
lock into place.
HINT: To minimize cleanup, place
a plastic grocery bag in the Pulp
Container to collect the pulp. (See
page 6 for more information.)
5