Establishing The Connection; Configuration With Project Assistant App - Bosch AUTODOME IP starlight 5100i IR Installation Manual

12 en | Introduction
Quantity
1 roll
1 tube
--
2.4

Establishing the connection

The unit must have a valid IP address to operate on your network and a compatible subnet
mask.
By default, DHCP is pre-set at the factory to On plus Link-Local so a DHCP server assigns an
IP address or, if no DHCP server is available, a link-local address (auto-IP) is assigned within
the range 169.254.1.0 to 169.254.254.255.
You can use the Configuration Manager to find the IP address. Download the software from
http://downloadstore.boschsecurity.com.
1.
2.
3.
Note:
If you cannot connect, the unit may have reached its maximum number of connections.
Depending on the device and network configuration, each unit can have up to 50 web browser
connections, or up to 100 connections via Bosch Video Client or BVMS.
2.5

Configuration with Project Assistant app

You can also use the Project Assistant app to complete the initial configuration of the camera.
In order to use this device with the Project Assistant app by Bosch, you must download the
app from the Bosch Download Store, from Google Play, or from the Apple Store.
You can access the app in several ways:
–
–
–
–
2021-02-19 | 0.7 |
Tool
Teflon tape
Weatherproof sealant, neutral cure type, electronic grade
Appropriate fasteners (of corrosion-resistant stainless steel with a
diameter of 10 mm (3/8 in.)), and anchors as necessary, dependent on
the surface to which the mount is attached
Start the Web browser.
Enter the IP address of the unit as the URL.
During initial installation, confirm any security questions that appear.
Scan the QR code from the QIG.
From www.boschsecurity.com, select Support > Apps and Tools > Online Apps - Video >
Bosch Project Assistant app. Select the appropriate operating system, and then click the
appropriate button to download and install the app.
From Google Play Store (play.google.com), search for Bosch Project Assistant. Select the
app from the list. Click the Install button.
From Apple Store (itunes.apple.com), search for Bosch Project Assistant. Select the app
from the list. Click the appropriate button to download and install the app.
Installation Manual
AUTODOME IP starlight 5100i IR
Bosch Security Systems