Breville JE16 Instructions Manual page 11

DISASSEMBLING YOUR PROFESSIONAL JUICER
•
Turn the Professinal Juicer 'Off' at the power outlet and unplug
•
Remove the Juice Collector Jug (1) and
then remove the Pulp Collector (2), as
shown in the previous page.
•
By placing both hands on either side of
the Safety Locking Arms (3), pull back
and lift over the grooves on either side of
the Juice Cover.
•
Lift the Food Pusher (4) out of the Feed
Chute.
•
Lift the Juice Cover (5) off the juicer.
•
To remove the Extractor Filter, hold base
of the Professional Juicer and turn
Extractor Filter Holder by the Juice
Outlet Spout.
Lift off the Extractor Filter Holder (6) with
the Extractor Filter still in place.
•
To remove the Extractor Filter (7), turn
the Extractor Filter Holder upside down
and carefully remove the Extractor
Filter. (It is recommended to remove the
Extractor Filter over the sink).
WARNING! The Extractor Filter contains small sharp blades to cut and process
fruits and vegetables. Do not touch blades when handling the Extractor Filter.
JE16_New.pmd
11
11
11
4
5
7
6
3
2
1
3/24/2006, 4:17 PM