3M Versaflo PAPR TR-300N+ Manual page 23

Installing & Removing: Filters
Turn the unit off and remove the filter cover
• Hold the unit so the filter cover faces you and press the
Reinstall the filter cover in the TR-300 unit
• Place the HE filter into the filter cover
• Hook the left side of the filter cover into the left side of
Ensure the HE filter label can be seen in the filter cover view
Always read and follow User Instructions
© 3M 2018
blue cover latch on the right side and lift off
the TR-300+ unit. Press down on the right side of the
cover until the latch fully engages.
Do not replace the filter with the unit running
.
#3MScienceofSafety
23
|