Rear-Facing Use; Vehicle Seat Lap; Shoulder Belt; Vehicle Seat Lap Belt - Graco SlimFit3 LX Instruction Manual

4-A Rear-Facing Use

Vehicle Seat Lap/

Shoulder Belt

Vehicle Seat Lap Belt

Visit www.gracobaby.com
and the Graco
LX car seat product page
to view installation videos.
NWL0001077519C SlimFit3 LX USA ENG R04 (8BZ20.indd 36 NWL0001077519C SlimFit3 LX USA ENG R04 (8BZ20.indd 36
Rear-Facing:
5-40 lb (2.2-18 kg) and whose
head is at least 1" (2.5 cm)
below the headrest adjustment
handle
• Infants who weigh less than 22 lb (10 kg) MUST
be rear-facing.
• Place car seat rear-facing in the vehicle back seat.
• Make sure lower anchor strap or vehicle seat belt
is routed through the rear-facing belt path marked
with a blue label.
• Install this car seat tightly in your vehicle. Car
seat should not move at the rear-facing belt path
more than 1" (2.5 cm) from side to side, front to
back.
• Check recline level making sure the ball is within
the blue area. Vehicle MUST be on level ground.
• Harness straps need to be at or just below
SlimFit3™
®
the top of child's shoulders and chest clip is at
armpit level.
36
9/18/20 11:49 AM 9/18/20 11:49 AM