Telefunken MOG-1 Instruction Manual page 21

 CHECK THAT YOUR ELECTRICAL INSTALLATION IS
SUFFICIENT FOR SUPPLYING AN APPLIANCE OF THIS
WATTAGE.
 TAKE ALL NECESSARY MEASURE WITH CORDS AND
EXTENSIONS TO AVOID ANY INJURIES WHILE IN USE.
 NEVER IMMERSE IN WATER OR ANY OTHER LIQUID THIS
APPLIANCE, ITS ELECTRIC PLUG AND CORD.
 ALWAYS UNPLUG THE APPLIANCE AND LET IT COOL
DOWN COMPLETELY BEFORE ANY CLEANING OPERATION.
 FOR YOUR OWN SAFETY, WE RECOMMEND YOU NEVER
LEAVE THE APPLIANCE IN A PLACE THAT IS EXPOSED TO
HUMIDITY OR INCLEMENT WEATHER CONDITION.
 NEVER USE APPLIANCE AS AN ADDITIONAL HEATING
SOURCE.
 DO NOT PUT THIS APPLIANCE ON TOP OF OTHERS.
 NEVER LEAVE APPLIANCE PLUGGED IN WHEN NOT IN USE.
 IF THE SUPPLY CORD IS DAMAGED, IT MUST BE REPLACED
BY THE MANUFACTURER, ITS SERVICE AGENT OR
SIMILARLY QUALIFIED PERSONS IN ORDER TO AVOID A
HAZARD.
 THE SUPPLY CORD SHOULD BE REGULARLY EXAMINED
FOR SIGNS OF DAMAGE AND THE APPLIANCE IS NOT TO
BE USED IF THE CORD IS DAMAGED.
 NEVER PLUG THE APPLIANCE AND TOUCH THE
THERMOSTAT WITH WET HANDS.
 NEVER USE THE APPLIANCE WITH BARE OR WET FEET.
ENGLISH
6