Cleaning And Maintenance - Telefunken VCBH5 Manual

3. Set the timer in delay use (AUTO ON)
temperature setting.
Press the MODE button until the timer icon blinks (
appear.
Use the "+" and "-" button to set the heater start time between 1 and 24 hours. This function
will activate once the timer icon stops blinking. The heater will automatically turn on when time
expires.
4. Set the continuous Run mode
Press the MODE button until the continuous run icon "
When set to continuous run mode, the auto-on/auto-off settings and the temperature setting
will be canceled. In continuous run, the heater will operate to the thermostat maximum
temperature setting and display room temperature.
Note: Overheating can be caused by obstruction to the air intakes on the back of the machine
or the grill on the front. If this occurs please disconnect the machine and allow it to cool for
30 minutes. If the heater ceases to function, the most likely cause is a blown fuse. Bring it back
to the after sales service.
WARNING: When not in use, ensure to switch off the heater by pressing on the button
(Red) on 0 (OFF) and unplug the heater from the socket.

CLEANING AND MAINTENANCE

 The appliance needs only an external regular cleaning, the recommended cleaning
frequency is every 2 weeks when used daily.
 Unplug the heater.
 Always let the appliance to cool down for at least two hours before starting any cleaning
operation.
 When cleaning the outer part of the heater, use a dry soft cloth (or sponge) or a damped
one with neutral cleaner.
 Do not use a hard brush or any others cleaners to avoid scratching the heater.
This function provides a delayed start option and should only
be set if you desire that the heater be automatically turned ON
after a certain period of time (1 to 24 hours from the time the
function is set). Always set the desired temperature prior to
setting the timer so that the heater will turn on at the desired
5
). The hour display and Auto On icon will
" appears.
ENGLISH