System Activation/Deactivation; Active Blind Spot Alert; Blind Spot Monitoring - Alfa Romeo Giulia 2020 Manual

"RACE" Driving Mode
The following active driver assistance safety
systems will not be available in the RACE
driving mode (Quadrifoglio versions only). If
any of these systems are selected, a dedi-
cated message will appear on the display.

Blind Spot Monitoring


Active Blind Spot Assist

Lane Departure Warning

Lane Keeping Assist

Forward Collision Warning

Driver Attention Assist

Intelligent Speed Control

Traffic Sign Recognition

86
SYSTEM ACTIVATION/
DEACTIVATION
Using the touchscreen function to proceed as
follows:
Press the display to select the desired item

Move the graphic button to the right: the

display will show the message "ON" (to
deactivate, move the graphic button to the
left - message "Off") and activate the
system.
Using the controls located on the center stack
to proceed as follows:
Turn the Rotary Pad and select the desired

item
Press on Rotary Pad to confirm the choice

and activate the system: the selected item
will be activated automatically. When the
system is activated, press the Rotary Pad to
deactivate it.

Active Blind Spot Alert

This function can be used to select the "readi-
ness" of the Active Blind Spot Assist system,
which can actively intervene on the steering
wheel if other objects are detected in the blind
spot of the exterior mirrors.
The options available are:
"Mode": used to set the following operating

modes: "Warning and
Warning", "Off" (where provided).
"Warning Type" can be used to set the

following operating modes: "Visual and
acoustic signal", "Visual and vibration",
"Acoustic and vibration".
"Sensitivity": this can be used set the "read-

iness" of the system to intervene, based on
the distance from the obstacle (the possible
options are "High" or "Low").
"Strength": this can be used to set the

"force" that the system must apply to the
steering wheel to warn the driver of the
need to keep the car in the lane (the
possible options are "High" or "Low").
Blind Spot Monitoring
This function can be used to set the warning
linked to the presence of objects in the door
mirror blind spot.
The options available are:
"Visual and Acoustic": the system warns the

driver that an obstacle is present through
acoustic (via the speakers in the car) and
visual indications using warning lights on
the door mirrors.
Brake", "Only