Management Of Voice Recognition For
Entering Navigation Addresses
Press the VR button
to start the voice
recognition session and enter a navigation
address using voice commands.
You can enter addresses in two different ways:
One-shot: Say "Navigate to <City, Address,
House Number>" after pressing the VR
button
to start the voice recognition
session. The radio system will be able to
recognize the address you inserted or
display a list of possible alternatives. Follow
the instructions provided by the radio
system to start route calculation.
Manual Entry: The radio system will help the
driver enter the individual fields through a
guided procedure, with the possibility of
using the "City", "Address" and "House
Number" voice commands. To activate this
mode, press the VR button
voice recognition session and send the first
command to enter the city and continue
following the instructions provided by the
radio system. If a language change is made
on the radio system, using the dedicated
menu in the "Settings", a pop-up screen will
appear to inform the driver about the
limited availability of the voice recognition
functions.
NOTE:
The location of the above message depends
on the destination country of the vehicle.
Only the countries shown on this pop-up
screen will be available with voice recogni-
tion functions for address and destination
selection. The available countries will
change according to the language type
selected by the driver
The "one-shot" address entry mode will not
be available if the driver chooses a
language other than the one used in the
country in which the car was marketed. In
this case, in order to access the voice recog-
nition functions and enter a valid address,
you will need to send to the radio system a
voice command to change country in
advance (for each use of the car).
Route Options
to start the
Press the Route Options button to show the
route options.
NOTE:
Press the Cancel button to interrupt the calcu-
lation process and return to the graphic
keyboard where you can change the previously
selected address.
Alternative routes
Once the address has been entered, the
display will show the "Route Alternatives"
screen. For each destination, the display
shows: arrival time distance (in miles or
km), route information (e.g. "Fastest",
"Shortest" or "Eco") and relative graphic
icons (the order of display of route informa-
tion is always "Fastest" - "Shortest" - "Eco")
Select the destination required: navigation
will start automatically
The "Route alternatives" screen is interactive:
the following actions are possible by inter-
acting with it using the touchscreen function:
Pressure and up/down drag: Zoom + / Zoom –
of the Map
Left/right movement: Horizontal movement
of Map
Pressing and holding down an object on the
Map: Starting point
Pressing the list of alternative routes: Selec-
tion of a route
With the "Route Alternatives" display active,
pressing the button
returns to the system
Main Menu.
59