Advertisement
1800138680 IS65XX.qxp_110x154 06/06/2016 08:14 Page27
TROUBLESHOOTING
Problems
There is no steam. The appliance has not
The steam flow is
low.
Water runs
through the holes
of the steam head.
The steamer takes
a long time to
heat and/or ejects
white particles.
ENVIRONMENT L PROTECTION FIRST !
i Your appliance contains valuable materials which can be recovered
or recycled.
‹ Leave it at a local civic waste collection point.
Possible causes
been turned on.
The hose has been
obstructed.
There is no water left in
the water tank.
The steam is not ready
yet.
Your steamer has a
build-up of scale
because it has not been
rinsed out regularly.
The hose has been
obstructed.
There is no water left in
the water tank.
There is condensation
in the hose.
Your steamer has a
build-up of scale
because it has not been
descaled
regularly.
Solutions
Check that the appliance has
been plugged in correctly. Next
press the On/Off pedal, the power
indicator light located at the front
of the appliance will come on.
Check that the hose is not bent or
twisted.
Switch off the device and fill the
water tank.
The appliance will produce steam
about 45 seconds after it has
been switched on.
See descaling process (Cleaning
paragraph).
Check that the hose is not bent or
twisted.
Switch off the appliance and fill
the water tank.
Never use a steamer in the
horizontal position. Hold the hose
vertically outstretched and wait
for the condensed water to return
to the steamer.
See descaling process
(Cleaning paragraph).
27
Advertisement
