Sony F970 Install And Power Kit - Sony F970 User Manual

1.4 Sony F970 Install and Power Kit

A Sony F970 external install and power kit design is added to the back
of the monitor. The external kit can be used to install and install the
external equipment, like wireless transmitter, LED light, video converter
and others which can be powered by Sony F970 battery.
The kit has two cross grooves, you can adjust the position of the external
device by loosening 2 screws up and down / left or right, or install the kit
upside down. When you don't need the kit, you can loosen the screws and
remove the kit.
Note: Before disassembling the kit, make sure that the monitor is turned
off, and then remove the battery or power adapter.
(1) Just move the kit: Loosen 2 screws, and then adjust up / down / left / right.
(2) Remove the external device: After the plug-in device is installed on the kit, if
your plug-in device has a locking button, and it is more difficult to press it to
remove it by hand, then you can use our assisting tool to disassemble.
7