Installation - Whirlpool LWT-800 Instruction Manual

INSTALLATION

Please install your washing machine according to the instructions provided.
Using the drain hose
The hose should drain smoothly
1. The fixation heig t of the hose should be less h
than 10cm from the ground.
2. Maximum fixation height for hanging the
hose(with a hook)over a drain outlet(eg.drain
pipe,bath or sink)should not be higher than
1.2metres above the floor. (This is for pump drain
model only)
3. Do not trample or press the hose.
Change the direction of the drain hose
Factory installation position of the drain
hose is shown in Figure 1.
The hose protrudes out from the washing
tub side.
Lay down the machine. And take the hose
out from the fixing groove. (Figure 2)
Along with the groove of the washing tub
side, insert the hose with steps 1 to 3 and
spread it to the washing side. (Figure 3)
Insert the hose in the groove by hand, do
not damage the hose.
Figure 1
Soft object
Figure 2
Figure 3
3
10cm
Drain
Back
Soft object
Front