Top Chassis Block, Power Cord - Sony HT-S500RF Service Manual

HT-S500RF/S700RF
2-4.

TOP CHASSIS BLOCK, POWER CORD

3 power cord connector
(CN501)
rear side
2 cushion
7 top chassis block
Note: When installing the top
chassis block, align the
two ribs and two holes.
hole
groove
4 three screws
(BVTT3 6)
rib
6 Draw the power cord
out of the groove.
8 Remove the power
cord in the direction
of the arrow.
9 power cord
(See Fig. C)
11
1 FFC (BT) (24 core)
(XP2)
AMP block
4 four screws
hole
5
rib
BT board
front side
claw
side
MAIN board
front side
Attach in order from 1 to 5.
(BVTT3 6)
power cord
rear side
1 Insert the power cord
to groove.
2 Pass power cord
through the groove
of top chassis.
4 Press the power cord
to the groove of top
chassis.
5 Fix the power cord
with the cushion.
Sony CONFIDENTIAL
For Authorized Servicer
FFC (BT)
(24 core)
– –
rear side
The opposite side
XP2
is terminal side.
groove
– –
AMP block
3 Install the top chassis block
on the AMP block, and fix
with the seven screws.
top chassis
CN501
power cord
SYS SET