Matching Connector/Cable; Signal Inputs/Outputs - Sony SNC-Z20N Service Manual

1-6. Matching Connector/Cable

Use the connectors and cables below or the equivalent when connecting a cable to the connector on the
rear panel during maintenance service.
Connector function name
VIDEO OUT
I/O port
Network port
Power input (DC 12 V/AC 24 V)
*2
Ground terminal
*1: The cable used is a Fujikura 5C-2V coaxial cable or the equivalent.
*2: When using a 24VAC power supply, the ground wiring is required.
*3: When connecting directly to the computer, use a cross cable.
When connecting to the network such as HUB, use a straight cable.

1-7. Signal Inputs/Outputs

1
TELE
ZOOM
WIDE
10 9 8 7 6 5 4 3 2
3
1 1 1 1 1 VIDEO OUT
. BNC type
. Impedance: 1 V p-p, 75 Z
. Signal system: Composite video
1-6
Matching connector/cable
BNC 75Z
Wire (AWG No.28 to 22)
UTP cable (CAT5) *3
UL cable (VW-1 style 1007)
UL cable (VW-1 style 1007)
+ DC 12V –
2 AC 24V 1
1
2
Sony part No.
1-569-370-12
_
_
_
_
2 Network port 2 2 2 2
. RJ45 modular jack
. 10BASE-T/100BASE-TX
. IEEE 802.3af
8 1
– External view –
Pin No. Signal name
1 TXD+
2 TXD_
3 RXD+
4 SPARE+
5 SPARE+
6 RXD_
7 SPARE_
8 SPARE_
* This connector is compliant with IEEE 802.3af.
I/O
O
O
I
I (Compliant with IEEE 802.3af)
I (Compliant with IEEE 802.3af)
I
I (Compliant with IEEE 802.3af)
I (Compliant with IEEE 802.3af)
SNC-Z20N/Z20P (E)