Example Workflow For Replacement Installations - Epson EB-755F Installation Manual
Ultra-short throw projector elpmb62 with wall mount elpmb62
Hide thumbs
Also See for EB-755F:
- User manual supplement (16 pages) ,
- User manual (312 pages) ,
- Quick setup (4 pages)
Table of Contents
Advertisement
About This Installation Guide
Example Workflow for Replacement Installations
You can replace the projector using the following workflow. The mount or your projector may differ from the
illustrations. For details on handling and adjusting the mount, see the Installation Guide for the projector that
has already been installed or for the wall mount.
a
Remove the old projector
•
Remove the end cap (also remove the wall plate cover if necessary)
•
Remove the adjustment unit from the setting plate
b
Install the new projector
•
Remove the adjustment unit from the old projector and attach it to the new projector
•
Attach the adjustment unit to the setting plate
c
Fine-tune the image
While projecting an image, fine-tune the position of the image using the adjustment dial on the mount
and the projector's correction features
d
Attach the end cap
or
3
Hide quick links:
Advertisement
Table of Contents
