Tcp/Ip Setting; Lan Interface Setup - Alfa Network AIP-W610 User Manual

TCP/IP Setting

LAN Interface Setup

To set up the configuration of LAN interface, Private IP of you router LAN
Port and Subnet mask for your LAN segment.
Configuration
IP address The IP of your Router LAN port (Default 192.168.1.1)
Subnet Mask Subnet Mask of you LAN (Default 255.255.255.0)
To give your LAN Client an IP, you have to enable "DHCP
Server". If not, manual setting up your client IP is necessary
DHCP Server
when you want to use the router as your client's default
gateway.
Specify the DHCP Client IP address range. You can also click
DHCP Client
the "Show Client" button to listed those connected DHCP
Range
clients.
Domain Name Specify a domain name of the device.
802.1d To prevent from network loops and preserve the quality of
Spanning tree bridged network
Mark this checkbox to allow this router to be recognized by
Enable UPnP
UPnP.
27