Samsung AM007FN1DCH/AA Service Manual page 162

No. Parts
4 Drain Pump & Hose 2) Remove the 2 screws and separate the Drain
5 Fan & Motor
6 Temperature Sensor 1) Remove the 6 screws which is fixed to
Samsung Electronics
Procedure
Hose that is on the side lower part of Indoor
Unit (Use +Screw Driver)
1) Remove the hex nut which is fixed to top of
Fan and separate the Fan from the Motor.
(Use Monkey Spanner)
2) Remove the 3 hex nuts which is fixed to
Motor and separate the Motor from the
Indoor Unit. (Use Monkey Spanner)
Evaporator and separate the Partition.
2) Separates the Temperature Sensor which is
fixed to Evaporator Pipe with the fixing clip
together by the hand.
Disassembly and Reassembly
Remark
3-105