Connecting To The Effect Send/Return Of A Mixing Console - Alesis ModFX Phingr Reference Manual

Connecting to the Effect Send/Return of a
mixing console:
Since the ModFX boxes don't have a wet/dry mix control, they're
designed more for in-line processing than the send/receive kind of
processing typically used for reverb units. However, plugging the
Phlngr into a mixer's effect send/return loop will allow you to
flange a mix of several instruments, from any mixer channel that
has its effect send raised.
To do this, connect a single cable from the Effect Send Out
(sometimes labeled "Aux Out") to the [LEFT/MONO] input of
the Phlngr. Use two separate cables to connect the [LEFT
OUTPUT] and [RIGHT OUTPUT] of the Phlngr to the left and
right inputs of a Stereo Effect Return, or to two adjacent mixer
channels panned to left and right.
Fro m Aux /Eff S en d
To re tu r ns
Connections
I f yo u use m ixe r cha nnels
f or the re tur ns f ro m the
Phlng r, b e su re th e Effec t
S en ds fo r th o se c ha n ne ls ar e
tur ne d a ll th e wa y o ff to a vo id
fee db ac k .
2
21