Table of Contents
Advertisement
Section 6: Specifications & Capacities
Section 6: Specifications & Capacities
Engine horsepower range
Gearbox horsepower
Gearbox lubrication
Gearbox oil capacity
Cutting capacity
Machine weight
Tongue weight
Blade tip speed
At 540 rpm
At 1000 rpm
A-frame tongue
Hitch types
LP Performance Hitch & Bar-
Tite hitch pivot shaft diameter
Hitch jack
Signal lights
Seven pin connector
Cutting width
Overall width
Transport width with 21" tires
Overall length
Deck height
Cutting height
Lift hydraulics
Wing flex while operating
Wing hydraulics
Wing transport protection
Deck material thickness
Side skirt construction
TM
Deck Armor
(Optional)
Wing deck skid shoes
Center deck skid shoes
Blades - 6 (2 per carrier)
Blade overlap
Blade bolt
Stump jumper / blade holder
options
Front & rear guards
Input driveline 540 & 1000 rpm
Intermediate driveline
Wing drivelines
Number of wheels
70
RC5715 & RCM5715 Rotary Cutters 331-431M
Table of Contents
RC5715 & RCM5715 Models
Specifications & Capacities
60 - 250 hp (44.7 - 186.4 kW)
540 rpm or 1000 rpm
250 hp (186 kW) Divider and 225 hp (168 kW) Center & Wings
Gear Lube 80-90W EP
Splitter: 5.5 pints (2.6 L); Center deck & Wings: 12.4 pints (5.87 L)
5" (13 cm)
5,880 lbs (2667 kg) - Weight includes base unit, six 21" laminated tires, HD single
suspension center & wing axles, 540 CV Cat. 4 main driveline package, front & rear single
chain guards, single acting fold cylinders, constant level clevis hitch, and forged blade bar
with bolt-on dishpan blade carriers.
2,226 lbs (1010 kg) with wings down.
Center Blades & Wing Blades = 16,400 FPM (83 mps)
Center Blades = 16,400 FPM (83 mps) & Wing Blades = 16,000 FPM (81.3 mps)
5" x 3" (12.7 cm x 7.6 cm) rectangular tubing.
Constant Level Swivel Clevis Hitch, LP Performance Hitch
Self Leveling Bar-Tite Hitch, Ball Hitch, or Constant Level Pintle Hitch.
2 1/4" (5.7 cm)
Standard 7,000 lbs. (3175.1 kg)
LED
SAE J560 pin configuration
15'-0" (4.57 m)
16'-0" (4.88 m)
10'-3" (3.12 m) - Single-acting fold option, 7'-3" (2.21 m) - Dual-acting fold option.
16'-3" (4.95 m) - With center deck raised fully up.
12" (30.5 cm)
1-1/2" - 16" (3.8 cm - 40.6 cm) - Varies by tire option.
3 1/2" x 8" hydraulic cylinder, hoses, fittings & flip-over spacers.
o
Max. 20
down, Can float up as needed as long as the wheel(s) are still on the ground.
3" x 12" hydraulic cylinders, hoses & fittings.
Wing Transport Lock Pin.
Top deck plate = 10 Gauge (3.4 mm); Bottom deck plate = 3/16" (5 mm)
Removable/replaceable 1/4" (6 mm) steel.
5/16" (8 mm) Steel plate
Each wing has one leading hardened beveled skid shoe and one trailing standard beveled
skid shoe. Both are reversible and replaceable.
Two replaceable beveled skid shoes and multiple mounting locations.
1/2" x 4" (1.3 cm - 10.2 cm) Heat-treated, free-swinging alloy steel with uplift.
6" (15.2 cm)
Keyed with hardened flat washer & locknut.
Forged blade bar without the dish pan.
Thick 3/16" (5 mm) round dish shaped pan, reinforced with the forged blade bar.
Thick 3/16" (5 mm) round dish shaped pan, reinforced with the heavy duty blade plate.
Stacked blade shredder Kit without the dish pan.
Optional single row chain or dual row chain.
Cat. 6 with constant velocity u-joint with or without over-running clutch.
Standard - Category 5 with slip-clutch.
Standard - Category 4 with slip-clutch or Category 5 with slip-clutch.
6 - Wheel option: Four on transport axle and one on each wing axle.
8 - Wheel option: Four on transport axle and two on each wing axle.
TM
,
1/20/21
Advertisement
Table of Contents
