Ext (Network) - Sony VPL-FHZ55 Service Manual

2-5-4. Ext (Network)

1. Add "AT32UC3A0128.xml" to the following.
ProgramFiles\Atmel\Flip3.3.4\bin\PartDescriptionFiles
2. Start the command prompt.
3. Add C:\Projector\FLEX-ANEM\ANEM Updater to path.
4. Execute "ANEMUpdateSerialCom.exe COM*".
n For COM*, enter the serial port number used for connecting PC.
5. Execute "batchisp -device AT32UC3A1512 -hardware RS232 -port COM* -baudrate 115200 -opera-
tion ERASE F MEMORY flash LOADBUFFER "C:\Projector\FLEX-ANEM\ANEM Updater\
ah1uvXXX.hex" PROGRAM start reset 0"
The updating starts, then the results are displayed as PASS or FAIL.
6. Check that no FAIL is displayed.
When the FAIL is displayed, repeat from step 1.
Example screen of updating the ROM.hex in
C:\Projector\FLEX-ANEM\ANEM Updater via COM1
The executed commands are in blue. The parameters needed to set are in yellow.
VPL-FHZ55
2-13 (E)