Technical Specifications; Sequencer Section - Akai MPC 60 Operator's Manual

10.2 Technical specifications

General:
• 320 character LCD display with graphics
• Disk drive: 3.5 inch 2DD (793K bytes formatted capacity)
• Computer: 80186 (10 MHz)
• Dimensions: 495(VV) X 127(H) X 471(D) mm
• Weight: 10.5 kg
• Power consumed: 30 W at AC 100V (50/60 Hz); 32 W at AC 120V (60
Hz), AC220V (50 Hz), or AC240V (50 Hz)
Sampler section:
• 40 KHz fixed sampling rate
• Sampling time (at 40 KHz): 13.1 seconds standard (750K bytes), or
26.2 seconds with sound memory expansion option (EXM003, 750K
bytes)
• Frequency response: 20 Hz ~ 18 KHz
• 16 bit A/D and D/A converters; samples stored in special non-
linear 12 bit format for much lower noise than 12 linear systems
• Tuning range: + 1/2 octave, - 1 octave
• Maximum number of drum sounds in memory: 32
• Maximum number of voices which may play simultaneously: 16
• Custom LSI sound processing chip

Sequencer section:

• Note capacity (not event capacity): 60,000 (512K bytes)
• Timing resolution: 96 divisions per 1/4 note
• Maximum number of sequences in memory: 99
• Number of simultaneous tracks per sequence: 99
• Output midi channels: 64
• Song mode: 20 songs, 256 steps per song
• Drum pads: 16 (velocity and pressure sensitive)
• Sync modes: SMPTE, Midi Time Code, Midi Clock, Midi Song
Position Pointer, FSK24, Pulse, 1/4 note clicks
Rear panel inputs/outputs:
• Record input: 1
• Record input gain switch (HI, MID, LO): 1
• Record input level (balanced):
• HI: -65 kBm, Imp. 45K
• MID: -45 dBm, Imp. 45K
• LO: -27 dBm, Imp. 45K
Section 10: Appendex
217