Table of Contents
Advertisement
Item
Operational Condition
and Key Function
Laser use time
While the player is
stopped and no disc is
inserted,
hold down the [STOP]
button on the player
and the
the remote controller
unit.
Reset laser use time While the usage time 1
is displayed, press and
hold down the [STOP]
button on the player
and the
the remote controller
unit.
Spindle use time
While the player is
stopped and no disc is
inserted,
hold down the [STOP]
button on the player
and the
the remote controller
unit.
Reset
spindle
use
While the usage time 2
time
is displayed, press and
hold down the [STOP]
button on the player
and the
the remote controller
unit.
Communication error
While the player is
display
stopped and no disc is
inserted,
hold down the [STOP]
button on the player
and the "MENU" button
on
controller unit.
Measurement
of
While the player is
laser
current
stopped and no disc is
electricity initialization
inserted,
value
hold down the [STOP]
button on the player
and
the
button on the remote
controller unit.
Measurement
of
While the player is
DVD
laser
current
stopped and no disc is
electricity
inserted,
hold down the [STOP]
button on the player
and
the
button on the remote
controller unit.
14.8. Tray Lock Function
14.8.1. Setting
· Disc Lock Function
1. With the SELECTOR on DVD/CD and POWER ON, hold down the [STOP] KEY on the main unit, and then press the
[POWER] KEY on the remote control for 3 seconds to enter to Lock mode A.[_ _ _LOCKED_] will be displayed for 3
seconds, and then current disc will begin playing.
2. In Lock mode A, the following key is disabled.
Laser usage time
Measures each for DVD and CD
press
and
respectively.
button on
Laser usage time reset
Resets both for DVD and CD at once.
button on
Spindle motor usage time
press
and
button on
Usage time 2 reset
Spindle motor usage time
button on
Displays frequency of communication
errors between system computer firm
press
and
IC and mechanical computer IC during
DVD module.
the
remote
Measurement
electricity initialization value
press
and
Memorizes each initialization value of
DVD and CD in EEPROM.
"PAUSE"
Measurement of DVD laser current
electricity
press
and
Measures DVD laser current electricity
and displays the result together with
the
initialization
"DISPLAY"
EEPROM. After measurement, DVD
laser is lit till the power is turned off (or
goes off when the primary power is
turned off).
Details
[_1234_5678]
The numbers in the left show usage
time for DVD laser and those in the
right for CD laser. The four-digit
number is shown by the ten hours in
the decimal digit. The number after
0000 is 9999.
[_0000_0000]
[_00_30__ERR]
The four-digit number is shown by
the ten hours in the decimal digit.
The number after 00_00 is 99_99.
[_00_00__ERR]
[_00_00__ERR]
of
laser
current
[xxx_yyy_DO]
DO : Laser current electricity
measurement mode
xxx : DVD current electricity value
yyy : CD current electricity value
Values are shown in the decimal
digit. The above example indicates
that the current electricity
initialization value is xxx mA at DVD
laser and yyy mA at CD laser when
laser is turned on.
[xxx_yyy_DD]
DD: DVD laser current electricity
measurement mode
value
stored
in
xxx: Current electricity initialization
value stored in EEPROM
yyy: Present value of current
electricity
Values are shown in the decimal
digit. The above example indicates
that the current electricity
initialization value is xxx mA and its
present value is yyy mA.
61
Display
To Exit Mode
Automatically exits
the mode after five
seconds.
Automatically exits
the mode after five
seconds.
Automatically exits
the mode after five
seconds.
Automatically exits
the mode after five
seconds.
Automatically exits
the mode after five
seconds.
Automatically exits
the mode after five
seconds.
Automatically exits
the mode after five
seconds.
SA-PM91DEE
Advertisement
Table of Contents
