Cr16 Mechanism Disassembly Procedure - Panasonic SA-PM91DEE Service Manual

Table of Contents

2. Unplug AC power cord after the indication of [BYE], then disassemble the body.

3. Disassemble the body, and take out CD loading mechanism.

4. Perform disassembly according to the following procedure for disassembly.

12.24. CR16 mechanism disassembly

procedure

12.24.1. Gear for servicing information

· This unit has a gear which used for chacking items

(open/close of disc tray, up/down operation of traverse unit

by manually) when servicing. (For gear information, that is

described on the items for disassembly procedures.)

· For preparation of gear (for servicing), perform the

procedures as follows.

· In case of re-servicing the same set, the " gear for servicing"

may be took off because it had been used. So, the "gear for

servicing" must be stored.

1. Remove the gear attached to top cover of CD loading

mechanism.

2. Insert the hexagonal wrench (2.5mm) into the gear.

12.24.2. Replacement of traverse deck

· Follow the (Step 1) - (Step 6) of Item 12.2.

· Follow the (Step 1) - (Step 4) of Item 12.3.

· Follow the (Step 1) - (Step 4) of Item 12.5.

· Follow the (Step 1) - (Step 4) of Item 12.8.

· Follow the (Step 1) - (Step 3) of Item 12.13.

· Follow the (Step 1) - (Step 4) of Item 12.16.

12.24.3. Replacement of optical pickup unit