Safety Precautions - Panasonic EH‑KN8C Operating Instructions Manual

Table of Contents

Advertisement

nanoe™ is a trademark of Panasonic Corporation.
A nanoe™ is a nano‑sized ion particle coated with water particles.

Safety precautions

To reduce the risk of injury, loss of life, electric shock, fire, and
damage to property, always observe the following safety
precautions.
Explanation of symbols
The following symbols are used to classify and describe the
level of hazard, injury, and property damage caused when the
denotation is disregarded and improper use is performed.
WARNING
CAUTION
The following symbols are used to classify and describe the
type of instructions to be observed.
This symbol is used to alert users to a specific
operating procedure that must not be performed.
This symbol is used to alert users to a specific
operating procedure that must be followed in order to
operate the unit safely.
Some parts of the safety precaution illustrations differ from the
actual product.
4
Denotes a potential
hazard that could result
in serious injury or death.
Denotes a hazard that
could result in minor
injury or property
damage.
WARNING
►Regarding the plug and cord
Do not use with the cord bundled.
- Doing so may cause fire or electric shock.
Do not damage the cord or pulg.
• Do not deface, modify, forcefully bend or pull the
cord or plug. Also, do not place anything heavy
on, twist or pinch the cord.
- Doing so may cause electric shock, burn or fire due to
a short circuit.
Do not use when the plug or cord is damaged or hot.
Never use the appliance if the plug fits loosely in a
household outlet.
- Doing so may cause burn, electric shock, or fire due to
a short circuit.
Do not connect or disconnect the plug to a
household outlet with a wet hand.
- Doing so may cause electric shock or injury.
Do not wrap the cord around the main body when
storing.
- Doing so may cause the wire in the cord to break with
the load, and may cause electric shock or fire due to a
short circuit.
Do not store or use the cord in a twisted state.
- Doing so may cause the wire in the cord to break with the
load, leading to electric shock or fire due to a short circuit.

Advertisement

Table of Contents
loading

Table of Contents