Programmed Playback - Aiwa JAX-T7 Operating Instructions Manual

DISC DIRECT
PLAY 1-3
En

Programmed playback

You can program the unit to playback selected tracks from one
or more discs in any order you specify.
1 In the stop mode, press MODE repeatedly until
"PLAYMODE" appears in the display and then
press ENTER.
2 Turn MULTI JOG to select "PROGRAM" and then
press ENTER.
" PGM " lights up.
If there is no MULTI JOG or button operation within 6
seconds, the setting is cancelled.
3 Press DISC DIRECT PLAY 1-3 to select a disc.
Go to the next step when the tray stops rotating.
On the remote, press DISC SKIP.
•If you press ENTER after pressing DISC DIRECT PLAY
1-3 to select a disc, the complete disc is programmed
to play.
•If you press ENTER after you select a MP3 album (see
"To select an album" on page 15), the complete album
is programmed to play.
14
MODE
ENTER
MULTI JOG
PLAY MODE
4 Turn MULTI JOG to select a track and then press
ENTER.
The selected track number and the program number appear
in the display.
On the remote, press r or t and then press ENTER
or press the numbered buttons:
-To select the track 10, press 0/10.
-To select the track 20, press +10, +10 and 0/10.
-To select the track 25, press +10, +10 and 5.
5 Repeat step 3 and 4 to program other tracks.
6 Press d(c/d on the remote).
On the remote, press PLAY MODE repeatedly until " PGM "
lights up and carry out step 3 to 6.
•During programmed playback, you cannot select a disc or
a track with the numbered buttons.
•If the total playback time of the program exceeds 99:59
minutes, or if a track with a track number exceeding 20 is
programmed, the playing time is displayed as "- -:- -".
•You cannot program more than 25 tracks. "FULL" is
displayed.
To clear a track
1–0/10,
Press s (CLEAR on the remote) in stop mode. A track is
+10
cleared from the end of the program.
DISC SKIP
To add tracks to the program
Repeat step 1 to 4 before starting playback. The tracks are
added to the end of the program.
To cancel programmed playback
Carry out step 1 and 2 and select "ALL DISCS
CONTINUE", "1 DISC CONTINUE" or "1 ALBUM
CONTINUE" in step 2.
CLEAR
•The program contents are retained even if the program is
cancelled or after programmed playback finishes. The same
program plays back if you carry out step 1, 2 and 6.
Notes on CDs
•Do not place more than one disc on one tray.
•Do not tilt the unit with discs loaded.