Aiwa FR-A200 Operating Instructions Manual page 2

PRECAUTIONS
2
AE!!!!HA
"CAUTION:TO REDUCE THE RISK OF
ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE,
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL."
The symbols are located on the bottom of cabinet.
Explanation of Graphical Symbols:
A
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated "dangerous
voltage" within the product's enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock to
persons.
A
The exclamation point within an equi-
lateral triangle is intended to alert the
user to the presence of important op-
crating and maintenance (servicing)
instructions in the literature accompa-
nying the appliance.
All the safety and operating instructions should be read before
the appliance is operated. The safety and operation instructions
should be retained for future reference. All warnings and
cautions on the appliance and in the operating instructions
should be adhered to. And all operating and use instructions
should be followed, as well as the safety suggestions below,
Installation
1
2
3
4
5
6
7
Water and moisture — Do not use this unit near water, such
as near a bathtub, washbowl, swimming pool, or the like.
Heat — Do not use this unit near sources of heat, including
heating vents, stoves, or other appliances that generate
heat. It also should not be placed in temperatures less than
5°C (41 'F) or greater than 35°C (95"F).
Mounting surface — Place the unit on a flat, even surface.
Ventilation — The unit should be situated with adequate
space around it so that proper heat ventilation IS assured.
Allow 10 cm (4 in.) clearance from the unit.
– Do not place the unit on a bed, rug, or similar surface that
may block the ventilation openings.
- Do not install the unit in a bookcase, cabinet, or airtight
rack where ventilation may be impeded.
Objects and liquid entry — Take care that objects or
liquids do not get inside the unit through the ventilation
openings.
Carts and stands — When placed or
mounted on a stand or cart, the unit should
be moved with care.
Quick stops, excessive force, and uneven
surfaces mav cause the unit or cart to
@
overturn or fal~.
Wall or ceiling mounting — The unit should not be
mounted on a wall or ceilina, unless s~ecified in the
Operating Instructions. -