Fuel Priming - Honda BF40D Manual

32ZZ4641.book 72 ページ ２０１８年８月３日 金曜日 午前９時４４分
STARTING THE ENGINE
MALE FUEL LINE CONNECTOR
– To outboard motor
CLIP
(OUTBOARD MOTOR SIDE)
2. Connect the fuel line connector to
the outboard motor, as shown.
Be sure the fuel line connector is
securely snapped in place.
If the outboard end fuel line
connector is forcibly installed in the
reversed direction, the fuel line
connector O-ring seal can be
damaged. A damaged O-ring seal
can cause a fuel leak.
72
FUEL FILLER CAP
VENT KNOB
OPEN
3. Turn the fuel filler cap vent knob
counterclockwise all the way to
open the vent.

Fuel Priming

OUTLET END
ARROW
(outboard motor
side)
PRIMER BULB
INLET END
(tank side)
Hold the priming bulb so that the
outlet end is higher than the inlet (so
that the arrow on the priming bulb
points up), and squeeze it until it feels
firm, indicating that fuel has reached
the outboard motor. Check for leaks.
Be careful not to spill any fuel.
Spilled fuel vapor may ignite. If
any fuel is spilled, make sure the
area is dry before starting the
engine.