Download Print this page

Advertisement

Quick Links

Instruction Manual
D100280X012
March 2017
289 Series Relief Valves
Warning
!
Failure to follow these instructions or to
properly install and maintain this
equipment could result in an explosion
and/or fire causing property damage and
personal injury or death.
Fisher™ relief valves must be
installed, operated and maintained in
accordance with federal, state and
local codes, rules and regulations and
manufacturer's instructions.
If a leak develops or if the outlet
continually vents gas, service to the
unit may be required. Failure to correct
trouble could result in a hazardous
condition. Only a qualified person must
install or service the unit.
Call a gas service person to service the
unit. Only a qualified person must install
or service the regulator.
Introduction
Scope of the Manual
This manual provides instructions for installation,
maintenance and parts ordering information for the
289 Series relief valves. Instructions for other
equipment used with these relief valves can be
found in separate instruction manuals.
Description
The 289 Series pressure relief valves (see Figure 1)
are throttling relief valves used downstream of
pressure regulators to protect the downstream system
from overpressure. These relief valves can be used
for natural gas, air, propane or other noncorrosive,
gas-flow service.
บริ ษ ั ท เอดี ด ี เฟอร์ เ นส จ ำกั ด
ADD FURNACE CO.,LTD.
44 ซอยบรมราชชนนี 70 ถนนบรมรำชชนนี แขวงศำลำธรรมสพน์ เขตทวี ว ั ฒ นำ กรุ ง เทพฯ 10170
โทร: 02-888-3472 โทร: ออกแบบ
08-08-170-170
:
https://www.add-furnace.com E-mail:
แฟกซ์ : 02-888-3258
sales@add-furnace.com
2 npt TYPE 289H
1 npt TYPE 289H
Figure 1. Type 289H Relief Valves
289 Series

Advertisement

loading

Summary of Contents for Emerson 289 Series

  • Page 1 Description The 289 Series pressure relief valves (see Figure 1) are throttling relief valves used downstream of 1 npt TYPE 289H pressure regulators to protect the downstream system from overpressure.
  • Page 2: Principle Of Operation

    08-08-170-170 https://www.add-furnace.com E-mail: sales@add-furnace.com 289 Series Specifications This section lists the specifications for the 289 Series regulators. Factory specification are stamped on the nameplate fastened on the regulator at the factory. Available Configurations Pressure Setting Adjustment Adjusting screw See Table 1...
  • Page 3 Figures 6 through 10) must first be removed: the screen (key 9), the snap ring (key 13) and the gasket (key 15). A typical installation of a 289 Series relief valve is shown in Figure 4. Warning If using a 289 Series relief valve on...
  • Page 4: Maintenance

    The relief valve body (key 1, Figures 6 depends upon the severity of service conditions. through 10) may remain in the pipeline This section contains information for inspection during maintenance unless replacement and maintenance of 289 Series relief valves. of the valve body is necessary.
  • Page 5 44 ซอยบรมราชชนนี 70 ถนนบรมรำชชนนี แขวงศำลำธรรมสพน์ เขตทวี ว ั ฒ นำ กรุ ง เทพฯ 10170 โทร: 02-888-3472 โทร: ออกแบบ แฟกซ์ : 02-888-3258 08-08-170-170 https://www.add-furnace.com E-mail: sales@add-furnace.com 289 Series Type 289H Spring case 1E7020-K A2960 Figure 5. Location of Travel Stop Drive Screw for 2 NPT Type 289H Relief Valve Table 1.
  • Page 6 44 ซอยบรมราชชนนี 70 ถนนบรมรำชชนนี แขวงศำลำธรรมสพน์ เขตทวี ว ั ฒ นำ กรุ ง เทพฯ 10170 โทร: 02-888-3472 โทร: ออกแบบ แฟกซ์ : 02-888-3258 08-08-170-170 https://www.add-furnace.com E-mail: sales@add-furnace.com 289 Series 5. Reattach the spring case using the Warning machine screws. 6. If a new spring with a different range is installed, Avoid personal injury or property damage from sudden release of stamp the spring case with the new spring range.
  • Page 7 แฟกซ์ : 02-888-3258 08-08-170-170 https://www.add-furnace.com E-mail: sales@add-furnace.com 289 Series 5. Slide the spacer (key 23) and the pitot tube (key 6. Slide the spacer (key 23) and the pitot tube (key 18) 18) and attached parts from the valve body.
  • Page 8: Parts List

    44 ซอยบรมราชชนนี 70 ถนนบรมรำชชนนี แขวงศำลำธรรมสพน์ เขตทวี ว ั ฒ นำ กรุ ง เทพฯ 10170 โทร: 02-888-3472 โทร: ออกแบบ แฟกซ์ : 02-888-3258 08-08-170-170 https://www.add-furnace.com E-mail: sales@add-furnace.com 289 Series Parts Orderin g Description part Number Diaphragm/Diaphragm Assembly (continued) Type 289H (2 NPT body)
  • Page 9 โทร: 02-888-3472 โทร: ออกแบบ แฟกซ์ : 02-888-3258 08-08-170-170 https://www.add-furnace.com E-mail: sales@add-furnace.com 289 Series 10A744-A APPLY LUBRICANTS (L) / SEALANT (S) L1 = Anti-seize Compound S = Thread Sealant 1. Lubricants and sealant must be selected such that they meet the temperature requirements.
  • Page 10 44 ซอยบรมราชชนนี 70 ถนนบรมรำชชนนี แขวงศำลำธรรมสพน์ เขตทวี ว ั ฒ นำ กรุ ง เทพฯ 10170 โทร: 02-888-3472 โทร: ออกแบบ แฟกซ์ : 02-888-3258 08-08-170-170 https://www.add-furnace.com E-mail: sales@add-furnace.com 289 Series 10 S 5 18A2816-A APPLY SEALANT (S) S = Thread Sealant 1. Sealant must be selected such that it meets the temperature requirements.
  • Page 11 44 ซอยบรมราชชนนี 70 ถนนบรมรำชชนนี แขวงศำลำธรรมสพน์ เขตทวี ว ั ฒ นำ กรุ ง เทพฯ 10170 โทร: 02-888-3472 โทร: ออกแบบ แฟกซ์ : 02-888-3258 08-08-170-170 https://www.add-furnace.com E-mail: sales@add-furnace.com 289 Series 6 L1 20 L2 AF8260-F Figure 9. Types 289HH and 1 NPT 289H Relief Valves L1 14...

This manual is also suitable for:

289a289l289u289h289hh