Connecting The Speakers - Aiwa SC-UC78 Operating Instructions Manual

CO/V/VECTIONA/VD SETTINGS
Backside of right Back side of left
Connecting the speakers
speaker -
@
speaker
cord
+8
to an AC
(input) cord
— USB cord
to headphones
(supplied)
jack
outlet
1
PortableCD player,
portableMD player,
portablecassetteplayer,
PC,sound board,etc.
To use the USB port, it must be configured by the computer. Connect the
speakers to the USB port after making sure that the port is properly
configured, as shown on page 6.
6
7
8
9
Connect the left speaker to the right speaker.
Donotconnect acordother than thespeaker cord from the left speaker
to the L SP OUT jack of the right speaker; otherwise these speakers
may be damaged.
Connect thespeaker cord before plugging thepower cord into anAC
outlet.
Connect the right speaker to your PC or another playback
device.
If the output from the audio source is monaural
Attach a commercially available plug adaptor (monaural + stereo) to
the INPUT PHONES (input) cord. Otherwise no sound will be produced
from the right speaker.
Make sure that the USB cord and INPUT PHONES (input) cord are
completely plugged in.
Malfunctions can occur when the cords are only partially plugged in.
Plug the power cord into an AC outlet.
Turn the VOLUME control on the right speaker fully to the left
and press the POWER switch ( = ON).
PC equipped with
USB port
8
ENGLISH