Connecting A Portable Cassette Player Or Other Equipment - Aiwa CDC-X155 Operating Instructions Manual

To skip tracks
Buttons Press" Press and hold
w Skips to the next Advances
track rapidly
Releases to
resume play
w Skips back to Reverses
the beginning of rapidly
the current track Releases to
resume play
*Press for less than 0.5 second.
TO skip
diSCS
To skip to the next disc, press DISC A.
To skip to the previous disc, press DISC Y
To play other disc
To stari playing the previous disc in the disc
magazine, press DISC V.
To start playing the next disc, " press
DISC A. The number of the disc (1.45) appears.
Note
You can not activate Random play function with
the optional CD changer by pressing RANDOM.
This function is designed only for the stereo car
CD receiver itself.
To repeat the current track, press REP (the
"REPEAT" indication appears).
To repeat the current disc, press REP 1.
To deactivate either mode, press the same button
again.
Press INT. (The "SCAN indication appears.)
The first 10 seconds of each track on all the discs
in the disc magazine will be played in sequence.
To deactivate Intro play, press INT again.
CONNECTING A
FWRTABLE
CASSETTE
PLAYER
OR OTHER
EQUIPMENT
1
1 Connect aportablecaaaette player,etc.
via the TAPE IN jack (3,5-mm dia.) on
the unit.
2 Press PWR to Iiaten to the connectad
equipment,
The 'TAPE IN' indication appears.
lFor further information on the portable cassette
Iplayer, etc., refer to the operating instructions
for the equipment.
Notes
. Connecting a plug to the TAPE IN jack
deactivates Radio, CD play and CD changer
Play mode and activates TAPE IN mode.
Disconnecting the plug deactivates TAPE IN
mode and returns the unit to its former status.
Whenthetimeris activated (page 10), connecting
a plug to the TAPE IN jack does not switch the
unit to TAPE IN mode. Press CD, CD CH, or
BAND before connecting the plug to the TAPE
IN jack.
Note
By pressing one of the following buttons, you can
deactivate Repeat play and Intro play DISC T,
DISC A, W, W, INT, REP, REP 1, PWR.
ENGLISH
14