H.flip-Back Armrests; Flip-Back Height Adjustable Armrests - Sunrise Medical Breezy 600 Series User Instruction Manual & Warranty

b. Slide assembly toward rear wheel, until
clamp embeds into tire, to prevent wheel
movement when in locked position.
H. FLIP-BACK ARMRESTS
Note: Non-removable; we install this armrest at the
factory.
I. FLIP-BACK HEIGHT ADJUSTABLE ARM-
RESTS (Optional)
Note: Armrest is removable; you can adjust the
height of the armrest pad.
1. To Flip Armrest Back
Push latch lever (1) toward tube to "flip"
or "tilt" armrest back.
2. Installation
a. Tilt armrest back and insert rear arm
tube (2) into receiver (3).
b. Tilt armrest forward. This will engage
pin to secure rear arm tube.
c. Push armrest down until front tube
locks in place.
3. Removal
a. Push latch lever (1) toward tube.
b. Tilt armrest back toward rear of chair.
c. Pull up on armrest (pin holding arm-
rest in rear tube will release).
4. Height Adjustment
a. Pull back on upper lever (4) to release.
b. Slide armrest up or down to chosen
height.
c. Release upper lever (4). Move armrest
slightly to make sure it locks in place.
X . S E T U P & A D J U S T M E N T
35
2
3
4
1
930300 Rev. E