Remove Evaporator; Remove The Fixing Plate Of Motor - Lennox LI036CI-180P432 Service Manual

Service Manual
Steps

16.Remove evaporator

a Remove screws between evaporator and bottom
case.
b Turn over the indoor unit and adjust the pipe line to
the position as shown by the broken line.
c Lift up the evaporator, and then remove the
evaporator.

17.Remove the fixing plate of motor

Remove 2 screws on fixing plate of motor, and then
remove the fixing pate of motor.
Installation and Maintenance
Procedure
evaporator
screw
screw
83