Hyundai HYPS-400 User Manual

Hyundai HYPS-400 User Manual

Portable power supply

Advertisement

USER MANUAL
HYPS-400
PORTABLE
POWER SUPPLY
HYPS-400
Please read and understand all important safety and
operating instructions before using this charger.
In addition, please read and follow all battery and
vehicle manufacturer's instructions and
cautionary markings.

Advertisement

Table of Contents
loading

Summary of Contents for Hyundai HYPS-400

  • Page 1 USER MANUAL HYPS-400 PORTABLE POWER SUPPLY HYPS-400 Please read and understand all important safety and operating instructions before using this charger. In addition, please read and follow all battery and vehicle manufacturer’s instructions and cautionary markings.
  • Page 2 HYPS-400 We are still constantly improving this portable power supply, therefore, some parts of this portable power supply may be changed in order to achieve the better quality, but the main functions and operations will not be alternated and changed. Your understanding would be greatly appreciated.
  • Page 3: Table Of Contents

    HYUNDAI Table of Contents SAFETY ABOUT HYPS-400 ABOUT SMART JUMPER CLAMPS CONNECTING TO THE BATTERY JUMP STARTING CHARGING USB POWER SUPPLY TO 19V LAPTOPS SUPPLY TO 12V DEVICES FLASHLIGHT...
  • Page 4: Safety

    6) Use of an accessory not recommended or sold by the manufacturer may result in a risk of fire, electric shock or injury to persons. Do not operate with damaged accessory(s). 7) Locate the HYPS-400 as far away from battery as jumper cables permit. 8) Do not expose to rain or wet conditions.
  • Page 5: About Hyps-400

    This item can instantly jump start most single battery vehicles, up to 30+ (over 30) times on a fully charge. The HYPS-400 is also equipped with USB power output, 19VDC power output, 12VDC power output and LED flashlight.
  • Page 6 HYPS-400 Product Layout: Flashlight Button 19V Output Port Power Button 12V Output Port LED Flashlight Battery Status Indicator 15V/1A Input Port USB Output Ports ENGINE START Socket...
  • Page 7: About Smart Jumper Clamps

    HYUNDAI 3. ABOUT SMART JUMPER CLAMPS Red LED BOOST Button EC5 Plug Green LED Positive Clamp Negative Clamp...
  • Page 8: Connecting To The Battery

    1) This unit is only for emergency use, not for frequent commercial use! ENGINE START socket is ALWAYS activated! Do not attempt to jumpstart your vehicle when the HYPS-400 battery capacity is below 25% (battery status indicator: 1 solid LED lit).
  • Page 9 One sound Ready to start the engine. Slow flash No buzzer Lithium battery voltage in HYPS-400 is rather low. Have not turned on the ignition switch within the regulated Slow flash No buzzer time. To resolve this, you need remove clamps from vehicle battery, and connect again when No.1 condition occurs.
  • Page 10: Charging

    In order to prolong the product life, be sure to fully recharge the unit after each jumpstaring, or every 3 months even if this unit has not been used. If battery voltage in the HYPS-400 is too low, this item will shut off to prevent damage to itself.
  • Page 11: Usb Power

    Press Power button to start 12V power. When disconnected, the HYPS-400 will automatically shut off. 2) Connect the HYPS-400 to 12V devices by the included accessory. Do not need press Power button as the EC5 12VDC output is ALWAYS activated. When battery voltage of 11 HYPS-400 is too low, 12V devices will stop running/charging.
  • Page 12 HYUNDAI Corporation 25, Yulgok-ro 2-gil, Jongno-gu, Seoul 03143 Korea Declare that the product detailed below : JUMP STARTER & PORTABLE POWER SUPPLY MODEL : HYPS-400 Satisfies the requirements of the Council Directives : EMC Directive 2014/30/EU RoHS Directive 2011/65/EU and conform with the norms :...
  • Page 13 HYUNDAI...
  • Page 14 HYPS-400...
  • Page 15 HYUNDAI...
  • Page 16 HYUNDAI Corporation 25, Yulgok-ro 2-gil, Jongno-gu, Seoul 03143, Korea, Post Code : 03143 82 2 390 1114 www.hyundaicorp.com Copyright 2016 HYUNDAI Corporation All rights reserved.

Table of Contents