Airlink101 AR570W User Manual page 52

Parameter
Enable Special Applications
IP Address
Computer Name
TCP/UDP Port to Open
Comment
Popular Application
Add (in red box)
Description
Check to enable Special Applications, or uncheck to disable.
This is the private IP of the computer/server behind the NAT
firewall. Note: You need to give your PC a fixed/static IP
address for Special Applications to work properly.
This is the computer that you need to enable the Special
Application function. Select a PC from here if you do not know
its IP address and click on the << button to add the IP address
to the left blank. If you do not see any computer after you click
on the drop-down menu, select the option "Refresh" and you will
be given a list of computers that are connected to your network.
This is the TCP/UDP ports you want to trigger. Type in a range
of TCP/UDP ports to be triggered. For instance, "5000-5300" or
"9091, 9093-9100", depending on your special application's
requirement.
The description of this setting.
This list includes many popular applications you may be using.
Select the application you want to use and click on the Add
button next to it; you will see the proper port numbers added to
the "TCP/UDP Port to Open" blank.
Click on Add button in the red box to save the Special
Application rule you set into the Current Trigger-Port Table.
53