6.2.2 Wireless Security
You can configure wireless security such as WEP or WPA encryption on this screen.
Note: It is recommended that you use WPA-PSK encryption over WEP if your wireless
clients support WPA-PSK. All of the wireless clients must use the same security settings
in order to connect to the router.
WEP
To enable WEP, select WEP from the Security Mode.
Encryption: Choose from 64 bits or 128 bits
Passphrase: You can enter a passphrase and click on the Generate button and the
router will automatically generate four WEP keys for you.
WEP Key 1 – 4: Manually assign a passphrase for each key. If you selected 64 bits
encryption, enter 10 HEX characters (0-F) for each key. If you selected 128 bits
encryption, enter 26 HEX characters (0-F) for each key.
TX Key: Select a key to be the active key.
Click Apply to save the setting.
16